How to Adjust Gas Fireplace Flame Color

• Users should open the damper before adjusting the flame color.
• You should give the gas fireplace a few minutes before adjusting the manual valve.
• Your fire will get enough oxygen with proper ventilation in your fireplace.

How to Adjust Gas Fireplace Flame Color

Have you been wondering how to adjust gas fireplace flame color? It’s important to ensure that all settings are correct when turning on your gas fireplace. We have your back if you want to know how to adjust gas fireplace flame color.

Step 1: Turn on the Control Knob

To turn on the pilot knob, you will be required to light the gas logs. Monitor the flame colors and give it a few minutes to settle. Most flames are blue when turned on.

You will notice yellow tips after all particles and dust are burned off. In case the flames are still blue, you should follow the steps below.

Step 2: Open the Damper

The main aim of opening the damper in the fireplace is to allow proper ventilation. Opening the fireplace damper will control the flame color. Make sure to lower the air input so that the flames have an orange or yellow tip.

This can be done by simply changing the damper and closing the air shutter.

You need knobs to adjust the air shutter. These knobs are located next to the decorative front in most gas fireplaces. Remember to turn off the fireplace when removing these knobs.

The gas fireplace should be allowed to cool before the user touches the front section. You will have an easy time making the adjustments if your gas fireplaces have a remote.

Step 3: Give the Fireplace a Few Minutes

You might not see results immediately even after adjusting the knobs. That’s why you are advised to give the fire a few minutes to adapt to different air levels easily. It is advisable to wait for at least thirty minutes.

You will have observed how the gas fireplace will respond within this time.

Step 4: Check Your Chimney

You should check your chimney or air vent if you don’t see any change. Turn off the gas fireplace completely. Kindly wait until the fireplace has cooled completely. The next thing you should do is perform routine maintenance.

That’s where fireplace ventilation comes in. Proper fireplace ventilation ensures that the fire gets the required levels of oxygen. In addition, it guarantees that your home will be free from harmful gases.

There is no doubt that gas fireplaces are a reliable way to stay cozy, especially during cold winter nights. Gas fireplaces have provided easy and instant heat in the last couple of years. You have a few different options if you want to adjust the color of your gas fireplace.

The most common option is using a remote control. Remote control will help you change colors across your room with only one button press. Users also have the option to adjust the gas fireplace manually.

You should adjust the gas fireplace until you get your desired color. Although gas fireplaces help people stay warm during the cold winter months, the heat produced might be too hot or insufficient.

Gas Fireplace Adjustment Knob and How It Works

The color adjustment knob is found on the front part of your gas fireplace. This feature is used to adjust the flame colors. The flames become yellow when the knob is turned clockwise.

If you turn the knob counter clockwise, the flames will be blue. For a long time, this knob has been used to customize the look of fire to match home décor.

Does your gas fireplace have a pilot light? Before adjusting to the flame color, you must turn the pilot light off. Press the red button on the front section of your gas fireplace. After doing this, you will notice a small flame burning in the upper right hand of your gas fireplace.

As you turn the adjustment knob, hold down the button. Don’t forget to release the button immediately after making your adjustments. Users are advised to wait for a few minutes for the pilot light to turn on. Next, press the pilot feature to turn it off.

What if your gas fireplace does not have the pilot light feature? It’s still possible to adjust the flame color by closing the gas supply.

Turn off the valve on the upper part of your gas fireplace. You will observe a small red button between two valves if done correctly. A small red button will be visible between the two valves.

Why Should Adjust Your Gas Fireplace Color?

There are a couple of reasons you should adjust your fireplace color. The flames on your fireplace might be very bright. In addition, they might be providing you with little or no heat.

Remember that some people prefer brighter flames. You have every reason to adjust your gas fireplace flame when you want.

Adjusting the gas fireplace flame is not a challenging task because you only need to access the manual valve. The manual valve is found close to the burner. Typically, the burner features a small wheel which gives you an easy time changing the color of your flames.

You should be careful not to adjust the manual valves too much. If you adjust the manual valves by mistake, you can turn them back to their original position. Consider making the smaller adjustment.

When to Avoid Adjusting Your Gas Fireplace Color

It is worth noting that there are instances when you should not adjust your gas fireplace color. Ensure that the flame is consistent when using a gas fireplace. Check if the logs are adequately arranged if you have issues using your gas fireplace.

Final Thoughts

After reading the above article, you can enjoy your gas fireplace and adjust your flame color. You should check your fireplace settings and manual valve when changing the flame color. Kindly don’t forget to check all safety standards when adjusting your fireplace color.

If you do that, your project will be hassle free and enjoyable.

References

• https://nextmodernhome.com/adjust-gas-fireplace-flame-color/

Eugene Duke

Hi, my name’s Eugene Duke and I love sitting by my fireplace reading a book and sipping on an adult beverage. Do you have a fireplace in your house? I’ll help you figure out the best type and style of fireplace for your home.